Optional - not included
The FP-50 Turbo Fuel Purifier
Click here for demostration video...
For small to midsize marine and sport equipment: Power range to approximately 150HP.
Throw away your knee pads!!
Purging the FP-50 Turbo is unbelievably simple: put a cup under the included 1/2" drain valve, turn the handle and empty the water and dirt into your cup - or - run a line down to a larger receptacle for occassional removal. No bleeding out air in your lines - no mess - no Knee Pads!
Clean your fuel while underway!
If your sailing along - why not clean your fuel? Simply bypass the engine with the installation of a few simple and inexpensive valves. Create a closed loop from the tank, through your FP-50 Turbo Purifier, your other catridge filters, and back to the tank! Turn on your fuel pump and clean your fuel with your enjoying your sail - Your optional sensor alarm kit will alert you when you need to purge the purifier!
"If you are a cruiser sailor - this is a very important "must have" item! We give this our highest recommendation - it really works and it is no wonder that the US Military and so many others use these purifiers!" David Doyle - Founder - Doyle Marine
Nominal flow: 0.5 gal/min 1.9 lts/min
In & out couplings: 3/8th"
Gross weight: 4 pounds
The FP-50 Turbo Fuel Purifier is a unique product utilizing a threestage
purification process using two well-known fuel separation principles,
centrifugal and coalescence.
By using these two principles, water and other
contaminants are separated from the fuel. This eliminates fuel filter clogging,
related breakdowns, down time, and frequent filter replacements.
As the fuel enters the purifier, it flows downward in a circular movement
through a internal baffle system entering the lower chamber of the purifier.
In the first stage of purification, the velocity of the fuel slows down considerably,
allowing any free water droplets and other contaminants to maintain
their mass and not emulsify with the fuel. These impurities accumulate and
remain at the bottom of the purifier until purged.
In the second stage of purification, the fuel migrates through three perforated
baffle plates to stop any particulates and attract, by way of coalescence, any
water droplets still remaining.
In the final stage of purification, the fuel passes through our patented coalescence
medium to assure that any small water droplets or particulates will be
coalesced out of the fuel stream. Only the clean fuel rises to the top, providing
a cleaner burning fuel for quicker ignition and better combustion. Consistent
clean fuel helps to increase the engine’s dependability, power, and efficiency.
On the FP-50, FP-80, FP-400 and FP-700, a heating element is optional to
preheat the fuel. This process helps liquefy the paraffin providing better lubrication
for the entire fuel system including the pump and injectors. This heating
element eliminates any wax or gelling problems.
Eliminates all water from the fuel system, thus avoiding time consuming
break downs while preventing the formation of damaging sulfuric acid.
Removes all solid particles from the fuel system, including oxides, dirt,
rubbish, and all other impurities with a density greater than that of the fuel
Preheats the paraffin contained in all fuel, providing superior lubrication of
the entire fuel system including the injector pump, injectors and cylinder
walls. (Heater-optional part)
Reduces down time.
Extends the life of the injection pump and the injectors.
Extends the life of the primary filter.
Protects and extends the life of the engine.
No internal or external parts requiring service or replacement.
Increases the operating life of fuel filters.
The major component of fuel filters is paper. Use of an FP-50 Turbo
fuel purifier results in fewer trees being cut each year.
Reduction in land fill due to fewer fuel filter replacements.
Providing fuel that is free of water and suspended particulates is the first
step in exhaust emissions control.
Significant improvement in exhaust emissions. Tests on these
fuel purifier's show that smoke emissions were reduced by
17.3%, carbon monoxide emissions by 10.4%, and nitrogen oxides by
Call for pricing!!
Don't forget the Water Sensor & Alarm Kit - click here...
Click here for Heater Unit...