Doyle Marine - Marine Supplies. Electronics, all kinds of Marine Supplies -

Home Video Library Chandlery Books & Reference Sale & Clearance

Didn't find what you want? Send us your list. We carry 1,000's of products not yet listed at the best prices.

Your satisfaction is our top priority. If for any reason you are dissatisfied with your purchase, we will replace, exchange or refund the item within 30 days. Note: Some custom orders may not qualify - terms for custom orders are stated clearly at the point of sale.

Doyle Marine appreciates your business. We respect your privacy and do not share customer contact information.

Chandlery > Marine Hardware | Engine Mounts

Click for larger image

R & D Engine Mount w/4" Footprint - 12mm Stud - 30-90lbs Capacity Per Mount
R & D Marine

Our Price $72.00
Retail Price: $90.00

Engine Mount w/4" Footprint - 12mm Stud - 30-90lbs Capacity Per Mount

The R & D Marine Engine Mounts are designed specifically for the rigors of marine applications. The mounts are stiff enough to absorb forward and reverse propeller thrust, yet soft enough to isolate drivetrain vibrations from the hull.

To help increase the longevity of the mounts, all steel parts are zinc plated and pasivated to limit corrosion. The rubber component is covered by an oil shield to protect it from petroleum based products.

R & D Marine mounts are preloaded based on the combined engine and transmission weight to limit engine movement. To facilitate in the ease of installation the mounts are height adjusting and the mounting holes in the base of the mount are slotted to assist in alignment of the drivetrain.

How To Select (details required):
1.Define the total weight of the engine and the transmission.
2.Determine 60% of the total weight and then divide by 2 to determine the capacity of each of the rear mounts (the mounts on the tranmission side of the engine).
3.Determine 40% of the total weight and then divide by 2 to determine the capacity of each of the front mounts (the mounts opposite the tranmission side of the engine).
4.Determine the stud necessary stud diameter and footprint of the mount.
5.Choose mount most appropriately sized for the per mount weight. When possible, choose the mount nearest the middle of the weight range.

Example:
Engine weight is 480lbs., transmission weight is 110lbs., footprint is 4", stud diameter is 5/8".
Total weight is 590lbs.
590 x .6 / 2 = 177 lbs per rear mount. Mounts required are 800-010
590 x .4 / 2 = 118 lbs per rear mount. Mounts required are 800-037

Why R&D Marine Engine Mounts?

Designed for marine use, accepts propeller and engine thrust in both directions
Offers a fail safe design
R & D Marine Mounts are height adjustable
Pre-loaded to reduce movement
Slotted holes in base to assist in alignment
Mount types to fit all applications

Item # Product Manufacturer Retail Price Our Price
54879 R & D Engine Mount w/4" Footprint - 12mm Stud - 30-90lbs Capacity Per Mount R & D Marine $ 90.00 $ 72.00

	Home About Us Press Room Boating Resources Customer Care Dealers Site Map Contact Us	© 2007-2018 - Doyle Marine
powered by Dalmatech